orangery barnet


Historically, the majority of conservatories and orangeries we built were manufactured in hardwood. Being an extremely versatile material, it is possible to make conservatory roofs of bewildering complexity and window details to match period features or contemporary tastes.  Hardwood frames can be painted in any colour, from subtle shades to bold hues. A wide range of stains are also available, all of which allow the natural beauty of the hardwood to show through.


Click here to go to the hardwood orangery photograph gallery



Accoya is premium timber product with superior stability and durability. It is fully FCS certified and boasts a range of environmental credentials making it one of the most eco-friendly building products available.

We use it for its technical properties on exposed elements that are susceptible to movement and weathering such as window sills, fascias and pilasters. We also offer Accoya windows and doors as an option.

In 2020 we became an Approved Accoya Manufacturer, Click here to find out more



Windows and doors

We use a self-draining glazing system that allows any moisture that penetrates behind the glazing beads to escape, prolonging the life of the double-glazed units. Opening sashes and doors feature with high-performance weather- seals,  high security friction hinges and shoot-bolt locking systems. This comprises a central dead latch and adjustable side bolts operated by the turn of a handle. The handle can be key locked if necessary, both fully closed or in a partially open position.



Conservatory Roof

The timber rafters are moulded internally and are arguably the, most attractive feature of a hardwood conservatory. Their size depends on the span, but are generally in the region of 44mm x 94mm. Externally, the rafters are fitted with powder-coated aluminium cappings with a lead coloured finish. This system leaves most of the outside of the roof maintenance free.  Hips and ridges are produced from larger timber sections and are finished externally with powder-coated aluminium or lead.




We can mix any colour whatsoever, however it is normally practical to limit the choice to RAL colours so any ancillary components such as aluminium roof cappings and guttering can be coated to match. All timber sections are fully treated and receive three spray applied factory coats of microporus paint/stain. This enhances the beauty of the natural hardwood, gives long-lasting weather protection, and most importantly allows the wood to breath.




The maintenance period of timber components will be dependant on the colour of the paint, the orientation of the building and on local site conditions. As mentioned above the exterior of the roof is not painted and the interior is not exposed to the weather, therefore it is normally just the outside of the windows, doors and fascia which will need taking care of.

It is recommended that a thorough inspection and clean is conducted at least once a year and any areas requiring attention are dealt with.  It is areas where water will run or sit, such as bottom beads and sills which will require re-painting first, although a complete redecoration may be required in the first few years of the building’s life.